Trauer um Prof. Dr.-Ing. Jens von Wolfersdorf
Das Institut für Thermodynamik der Luft- und Raumfahrt trauert um Prof. Dr.-Ing. Jens von Wolfersdorf (15.5.1963 - 2.10.2024). Prof. von Wolfersdorf verstarb unerwartet nach kurzer, schwerer Krankheit, am 2.10.2024.
Nach seiner Industrietätigkeit am ABB Forschungszentrum/Alstom Technology in Baden in der Schweiz wurde er in 2001 als Professor an die Universität Stuttgart berufen. Dort war er am Institut für Thermodynamik der Luft- und Raumfahrt für mehr als 20 Jahre als Professor und stellvertretender Institutsleiter tätig. Für seine vielfältigen wissenschaftlichen Beiträge auf dem Gebiet der Wärmeübertragung war er international sehr bekannt und hoch angesehen.
Wir trauern um einen großartigen Wissenschaftler, einen stets freundlichen und hilfsbereiten Menschen. Unser tief empfundenes Mitgefühl gilt seiner Familie.
Wir alle werden ihn sehr vermissen und werden ihm ein ehrendes Andenken bewahren!
Publikationen
- de Arcos, D. G., Waidmann, C., Poser, R., von Wolfersdorf, J., Jäppelt, B., & Semmler, K. (2025). Effect of protrusions and leading edge ribs on the local heat transfer characteristics in a two-pass cooling channel under rotation. Journal of the Global Power and Propulsion Society. https://doi.org/10.33737/jgpps/204535
- Gutiérrez de Arcos, D., Waidmann, C., Poser, R., von Wolfersdorf, J., & Göhring, M. (2024). Rotationally Induced Local Heat Transfer Features in a Two-Pass Cooling Channel: Experimental–Numerical Investigation. International Journal of Turbomachinery, Propulsion and Power, 9, Article 4. https://doi.org/10.3390/ijtpp9040034
- de Arcos, D. G., Waidmann, C., Poser, R., von Wolfersdorf, J., & Göhring, M. (2024). Rotationally Induced Local Heat Transfer Features in a Two-Pass Cooling Channel: Experimental–Numerical Investigation. International Journal of Turbomachinery, Propulsion and Power, 9, Article 4. https://doi.org/10.3390/ijtpp9040034
- Hartmann, C., & von Wolfersdorf, J. (2024). Determination of Local Heat Transfer Coefficients and Friction Factors at Variable Temperature and Velocity Boundary Conditions for Complex Flows. Fluids, 9, Article 9. https://doi.org/10.3390/fluids9090197
- Gutiérrez de Arcos, D., Waidmann, C., Poser, R., von Wolfersdorf, J., Jäppelt, B., & Semmler, K. (2024, September). Effect of protrusions and leading edge ribs on the local heat transfer characteristics in a two-pass cooling channel under rotation. Proceedings of Global Power &Amp; Propulsion Society. https://doi.org/10.33737/gpps24-tc-045
- de Arcos, D. G., Waidmann, C., Poser, R., von Wolfersdorf, J., Jäppelt, B., & Semmler, K. (2024, September). Effect of protrusions and leading edge ribs on the local heat transfer characteristics in a two-pass cooling channel under rotation. Proceedings of Global Power &Amp; Propulsion Society. https://doi.org/10.33737/gpps24-tc-045
- de Arcos, D. G., Waidmann, C., Poser, R., von Wolfersdorf, J., & Jäppelt, B. (2022, June). Comparison of Experimental and Numerical Local Rotational Heat Transfer Effects in a Two-Pass Cooling Channel Configuration. Volume 6B: Heat Transfer — General Interest/Additive Manufacturing Impacts on Heat Transfer; Internal Air Systems; Internal Cooling. https://doi.org/10.1115/gt2022-79846
- Waidmann, C., Poser, R., de Arcos, D. G., Göhring, M., von Wolfersdorf, J., Semmler, K., & Jäppelt, B. (2022, June). Experimental Investigation of Local Heat Transfer in a Rotating Two-Pass Cooling Channel Using the Transient Thermochromic Liquid Crystal (TLC) Technique. Volume 6B: Heat Transfer — General Interest/Additive Manufacturing Impacts on Heat Transfer; Internal Air Systems; Internal Cooling. https://doi.org/10.1115/gt2022-81291
- de Arcos, D. G., Waidmann, C., Poser, R., von Wolfersdorf, J., & Jäppelt, B. (2022, June). Comparison of Experimental and Numerical Local Rotational Heat Transfer Effects in a Two-Pass Cooling Channel Configuration. Volume 6B: Heat Transfer — General Interest/Additive Manufacturing Impacts on Heat Transfer$\Mathsemicolon$ Internal Air Systems$\Mathsemicolon$ Internal Cooling. https://doi.org/10.1115/gt2022-79846
- Seibold, F., Schwab, A., Dubois, V., Poser, R., Weigand, B., & von Wolfersdorf, J. (2020). Conduction and Inertia Correction for Transient Thermocouple Measurements. Part I: Analytical and Numerical Modeling. Measuring Techniques in Turbomachinery.
- Seibold, F., Schwab, A., Dubois, V., Poser, R., Weigand, B., & von Wolfersdorf, J. (2020). Conduction and Inertia Correction for Transient Thermocouple Measurements. Part I: Analytical and Numerical Modeling. XXV Biennial Symposium on Measuring Techniques in Turbomachinery.
- Prokein, D., & von Wolfersdorf, J. (2019). Numerical Simulation of Turbulent Boundary Layers with Foreign Gas Transpiration using OpenFOAM. Acta Astronautica, 158, 253–263. https://doi.org/10.1016/j.actaastro.2019.03.030
- Steurer, A., Poser, R., von Wolfersdorf, J., & Retzko, S. (2019). Application of the Transient Heat Transfer Measurement Technique Using Thermochromic Liquid Crystals in a Network Configuration with Intersecting Circular Passages. Journal of Turbomachinery 2019, 141, Article 5. https://doi.org/10.1115/1.4041807
- Frąckowiak, A., Wolfersdorf, J. V., & Ciałkowski, M. (2019). Optimization of cooling of gas turbine blades with channels filled with porous material. International Journal of Thermal Sciences, 136, 370–378. https://doi.org/10.1016/j.ijthermalsci.2018.09.005
- Schindler, A., Brack, S., & von Wolfersdorf, J. (2019). Coupled FE-CFD Analysis of Transient Conjugate Heat Transfer. https://www.euroturbo.eu/publications/proceedings-papers/etc2019-158/
- Prokein, D., Dittert, C., Böhrk, H., & von Wolfersdorf, J. (2019). Numerical simulation of transpiration cooling experiments in supersonic flow using OpenFOAM. CEAS Space Journal. https://doi.org/10.1007/s12567-019-00292-6
- Steurer, A., Poser, R., von Wolfersdorf, J., & Retzko, S. (2019). Application of the transient heat transfer measurement technique using thermochromic liquid crystals in a network configuration with intersecting circular passages. Journal of Turbomachinery, 141, Article 5. https://doi.org/10.1115/1.4041807
- Steurer, A., & von Wolfersdorf, J. (2019). Untersuchung der lokalen Wärmeübergangseigenschaften komplexer Kühlungsstrukturen durch Kombinationen experimenteller und numerischer Methoden. Schlussbericht AG Turbo COOREFLEX-turbo 3.2.4.
- Goehring, M., Hartmann, C., & Von Wolfersdorf, J. (2018). Numerical investigation of transient heat transfer experiments under rotation. Proceedings of the ASME Turbo Expo, 5A-2018. https://doi.org/10.1115/GT2018-76497
- Steurer, A., Poser, R., von Wolfersdorf, J., & Retzko, S. (2018). Application of the Transient Heat Transfer Measurement Technique Using TLC in a Network Configuration with Intersecting Circular Passages.
- Goehring, M., Hartmann, C., & von Wolfersdorf, J. (2018, June). Numerical Investigation of Transient Heat Transfer Experiments Under Rotation. Volume 5A: Heat Transfer. https://doi.org/10.1115/gt2018-76497
- Steurer, A., Poser, R., Von Wolfersdorf, J., & Retzko, S. (2018). Application of the transient heat transfer measurement technique using TLC in a network configuration with intersecting circular passages. Proceedings of the ASME Turbo Expo, 5A-2018. https://doi.org/10.1115/GT2018-76551
- Förster, F. J., Brack, S., Poser, R., von Wolfersdorf, J., & Weigand, B. (2018). A novel surface-integrated spray-on thermocouple for heat transfer measurements. Experimental Thermal and Fluid Science, 93, 356–365. https://doi.org/10.1016/j.expthermflusci.2018.01.017
- Prokein, D., Dittert, C., Böhrk, H., & von Wolfersdorf, J. (2018). Transpiration Cooling Experiments on a CMC Wall Segment in a Supersonic Hot Gas Channel. https://doi.org/10.2514/6.2018-4696
- Prokein, D., Dittert, C., Böhrk, H., & von Wolfersdorf, J. (2018). Numerical Simulation of Transpiration Cooling Experiments in Supersonic Flow using OpenFOAM.
- Liu, C.-L., Gao, C., von Wolfersdorf, J., & Zhai, Y.-N. (2017). Numerical study on the temporal variations and physics of heat transfer coefficient on a flat plate with unsteady thermal boundary conditions. International Journal of Thermal Sciences, 113, 20–37. https://doi.org/10.1016/j.ijthermalsci.2016.11.013
- Makowka, K., Dröske, N. C., von Wolfersdorf, J., & Sattelmayer, T. (2017). Hybrid RANS/LES of a supersonic combustor. Aerospace Science and Technology, 69, 563–573. https://doi.org/10.1016/j.ast.2017.07.025
- Frackowiak, A., von Wolfersdorf, J., & Ciałkowski, M. (2017). An iterative algorithm for the stable solution of inverse heat conduction problems in multiply-connected domains. International Journal of Thermal Sciences, 96. https://doi.org/10.1016/j.ijthermalsci.2015.02.016
- Steelant, J., Dalenbring, M., Kuhn, M., Bouchez, M., & Von Wolfersdorf, J. (2017). Achievements obtained within ATLLAS-II on aero-thermal loaded material investigations for high-speed vehicles. 21st AIAA International Space Planes and Hypersonics Technologies Conference, Hypersonics 2017. https://www.scopus.com/inward/record.uri?eid=2-s2.0-85017532944&partnerID=40&md5=be27e0d439c4daaba5fb15cf044d8dcb
- Prokein, D., & von Wolfersdorf, J. (2017). Numerical Simulation of Turbulent Boundary Layers with Foreign Gas Transpiration using OpenFOAM. https://doi.org/10.13009/EUCASS2017-58
- Dröske, N. C., Förster, F. J., Weigand, B., & von Wolfersdorf, J. (2017). Thermal investigation of an internally cooled strut injector for scramjet application at moderate and hot gas conditions. Acta Astronautica, 132, 177–191. https://doi.org/10.1016/j.actaastro.2016.12.023
- Schulz, S., Brack, S., Terzis, A., von Wolfersdorf, J., & Ott, P. (2016). On the effects of coating thickness in transient heat transfer experiments using thermochromic liquid crystals. Experimental Thermal and Fluid Science, 70, 196–207. https://doi.org/10.1016/j.expthermflusci.2015.08.011
- Förster, F. J., Dröske, N. C., Bühler, M. N., von Wolfersdorf, J., & Weigand, B. (2016). Analysis of flame characteristics in a scramjet combustor with staged fuel injection using common path focusing schlieren and flame visualization. Combustion and Flame, 168, 204–215. https://doi.org/10.1016/j.combustflame.2016.03.010
- Axtmann, M., Poser, R., Von Wolfersdorf, J., & Bouchez, M. (2016). Endwall heat transfer and pressure loss measurements in staggered arrays of adiabatic pin fins. Applied Thermal Engineering, 103, 1048–1056. https://doi.org/10.1016/j.applthermaleng.2016.04.066
- Terzis, A., Skourides, C., Ott, P., von Wolfersdorf, J., & Weigand, B. (2016). Aerothermal investigation of a single row divergent narrow impingement channel by particle image velocimetry and liquid crystal thermography. Journal of Turbomachinery, 138, Article 5. https://doi.org/10.1115/1.4032328
- Terzis, A., Bontitsopoulos, S., Ott, P., Von Wolfersdorf, J., & Kalfas, A. I. (2016). Improved accuracy in jet impingement heat transfer experiments considering the layer thicknesses of a triple thermochromic liquid crystal coating. Journal of Turbomachinery, 138, Article 2. https://doi.org/10.1115/1.4031786
- Löhle, S., Schweikert, S., & Von Wolfersdorf, J. (2016). Method for heat flux determination of a transpiration-cooled wall from pressure data. Journal of Thermophysics and Heat Transfer, 30, Article 3. https://doi.org/10.2514/1.T4815
- Brack, S., Poser, R., & Von Wolfersdorf, J. (2016). An approach to consider lateral heat conduction effects in the evaluation process of transient heat transfer measurements using TLC. International Journal of Thermal Sciences, 107, 289–302. https://doi.org/10.1016/j.ijthermalsci.2016.03.028
- Schulz, S., Schindler, A., & von Wolfersdorf, J. (2016). An experimental and numerical investigation on the effects of aerothermal mixing in a confined oblique jet impingement configuration. Journal of Turbomachinery, 138, Article 4. https://doi.org/10.1115/1.4032022
- Prokein, D., Böhrk, H., & von Wolfersdorf, J. (2015). Analysis of Anisotropy Effects for Transpiration Cooled CMC Leading Edges using OpenFOAM. https://doi.org/10.2514/6.2015-3552
- Liu, C.-L., Wolfersdorf, J. V., & Zhai, Y.-N. (2015). Comparison of time-resolved heat transfer characteristics between laminar and turbulent convection with unsteady flow temperatures. International Journal of Heat and Mass Transfer, 84, 376–389. https://doi.org/10.1016/j.ijheatmasstransfer.2015.01.034
- Bouchez, M., Dufour, E., Le Naour, B., Wilhelmi, C., Bubenheim, K., Kuhn, M., Mainzer, B., Riccius, J., Davoine, C., Justin, J.-F., Axtmann, M., von Wolfersdorf, J., Spring, S., Villace, V. F., & Steelant, J. (2015). Combustor materials research studies for high speed aircraft in the European Program ATLLAS-II. 20th AIAA International Space Planes and Hypersonic Systems and Technologies Conference, 2015. https://www.scopus.com/inward/record.uri?eid=2-s2.0-84947969355&partnerID=40&md5=339c92264b8bfcb7fe305124962e723c
- Terzis, A., Ott, P., Cochet, M., Von Wolfersdorf, J., & Weigand, B. (2015). Effect of varying jet diameter on the heat transfer distributions of narrow impingement channels. Journal of Turbomachinery, 137, Article 2. https://doi.org/10.1115/1.4028294
- Dahmen, W., Müller, S., Rom, M., Schweikert, S., Selzer, M., & Von Wolfersdorf, J. (2015). Numerical boundary layer investigations of transpiration-cooled turbulent channel flow. International Journal of Heat and Mass Transfer, 86, 90–100. https://doi.org/10.1016/j.ijheatmasstransfer.2015.02.075
- Axtmann, M., Von Wolfersdorf, J., & Meyer, G. (2015). Application of the transient heat transfer measurement technique in a low aspect ratio pin fin cooling channel. Proceedings of the ASME Turbo Expo, 5A. https://doi.org/10.1115/GT2015-42085
- Liu, C.-L., Von Wolfersdorf, J., & Zhai, Y.-N. (2015). Time-resolved heat transfer characteristics for periodically pulsating turbulent flows with time varying flow temperatures. International Journal of Thermal Sciences, 89, 222–233. https://doi.org/10.1016/j.ijthermalsci.2014.11.008
- Prokein, D., von Wolfersdorf, J., & Böhrk, H. (2015). Analysis of anisotropy effects for transpiration cooled CMC leading edges using OpenFOAM. 20th AIAA International Space Planes and Hypersonic Systems and Technologies Conference, 2015. https://www.scopus.com/inward/record.uri?eid=2-s2.0-84947997716&partnerID=40&md5=34675b2ffcc0bf618fd60b61a6ef8929
- Schulz, S., Schindler, A., & Von Wolfersdorf, J. (2015). An experimental and numerical investigation on the effects of aerothermal mixing in a confined oblique jet impingement configuration. Proceedings of the ASME Turbo Expo, 5A. https://doi.org/10.1115/GT2015-42286
- Terzis, A., von Wolfersdorf, J., Weigand, B., & Ott, P. (2015). A method to visualise near wall fluid flow patterns using locally resolved heat transfer experiments. Experimental Thermal and Fluid Science, 60, 223–230. https://doi.org/10.1016/j.expthermflusci.2014.09.009
- Axtmann, M., von Wolfersdorf, J., & Meyer, G. (2015). Application of the transient heat transfer measurement technique in a low aspect ratio pin fin cooling channel. Journal of Turbomachinery, 137, Article 12. https://doi.org/10.1115/1.4031267
Promovierte des ITLR
2020- Dr. -Ing. Bernard, Ronan
2020- Dr.-Ing. Baggio, Martina
2020- Dr.-Ing. Göhring, Michael
2020- Dr.-Ing. Brack, Stefan
2020- Dr.-Ing. Ruberto, Stefano
2019 - Dr.-Ing. Geppert, Anne K.
2019 - Dr.-Ing. Novotný, Pavel
2019 - Dr.-Ing. Weckenmann, Florian
2019 - Dr.-Ing. Schweikert, Sven
2019 - Dr.-Ing. Ertl, Moritz
2019 - Dr.-Ing. Reitzle, Martin
2019 - Dr.-Ing. Steurer, Anika
2019 - Dr.-Ing. Baab, Steffen
2019 - Dr.-Ing. Bork, Andrea
2018 - Dr.-Ing. Bhatia, Anuradha Ashok
2018 - Dr.-Ing. Axtmann, Meriam
2018 - Dr.-Ing. Helcig, Christian
2018 - Dr.-Ing. Unrath, Johannes
2018 - Dr.-Ing. Petzke, Thomas
2017 - Dr.-Ing. Biegger, Christoph
2017 - Dr.-Ing. Schulte, Kathrin
2017 - Dr.-Ing. Chen, Lingling
2017 - Dr.-Ing. Huber, Christoph
2017 - Dr.-Ing. Schulz, Sebastian
2017 - Dr.-Ing. Brakmann, Robin G.
2016 - Dr.-Ing. Haase, Kristian
2016 - Dr.-Ing. Förster, Felix
2016 - Dr.-Ing. Dröske, Nils
2016 - Dr.-Ing. Winkler, Sven
2015 - Dr.-Ing. Manosroi, Woradej
2015 - Dr.-Ing. Rabadán, Edder José
2015 - Dr.-Ing. Egger, Christian
2015 - Dr.-Ing. Wohler, Anja
2014 - Dr.-Ing. Vellaramkalayil, Jiby
2014 - Dr.-Ing. Mayer, Barbara
2014 - Dr.-Ing. Zhu, Chengxiang
2014 - Dr.-Ing. Rauschenberger, Philipp
2014 - Dr.-Ing. Gomaa, Hassan
2014 - Dr.-Ing. Banuti, Daniel
2014 - Dr.-Ing. Kamoun, Hend
2013 - Dr.-Ing. Ben Ahmed, Fahmi
2013 - Dr.-Ing. Kobiela, Bernhard
2013 - Dr.-Ing. Gauer, Markus
2013 - Dr.-Ing. Schüren, Simon
2012 - Dr.-Ing. Friedrich, Markus
2012 - Dr.-Ing. Lerch, Andreas
2012 - Dr.-Ing. Domaschke, Norbert
2012 - Dr.-Ing. Hell, Annika
2011 - Dr.-Ing. Stotz, Ingo
2011 - Dr.-Ing. Höfler, Florian
2011 - Dr.-Ing. Langener, Tobias
2011 - Dr.-Ing. Kunstmann, Sébastien
2010 - Dr.-Ing. Barth, Tarik
2010 - Dr.-Ing. Scheuermann, Tobias
2010 - Dr.-Ing. Coletti, Filippo
2010 - Dr.-Ing. Heidrich, Peter
2010 - Dr.-Ing. Spring, Sebastian
2010 - Dr.-Ing. Sander, Wolfgang
2009 - Dr.-Ing. Suzzi, Daniele
2009 - Dr.-Ing. Chun, Jaechul
2009 - Dr.-Ing. Urban, Juliane
2009 - Dr.-Ing. Rosenko, Eduard
2009 - Dr.-Ing. Schwientek, Alexander O.
2009 - Dr.-Ing. Schlottke, Jan
2009 - Dr.-Ing. Poser, Rico
2009 - Dr.-Ing. Steinbrück, Helga
2009 - Dr.-Ing. Zehner, Sebastian
2009 - Dr.-Ing. Xing, Yunfei
2008 - Dr.-Ing.Maurer, Michael
2008 - Dr.-Ing. Dietz, Christopher
2008 - Dr.-Ing. Lauffer, Diane
2008 - Dr.-Ing. Uddin, Naseem
2008 - Dr.-Ing. Pape, Detlef
2008 - Dr.-Ing. Arnold, Richard
2007 - Dr.-Ing. Henze, Marc
2007 - Dr.-Ing. Graf, Frank
2006 - Dr.-Ing. Seibel, Christian Marcus
2006 - Dr.-Ing. Brauckmann, Dennis
2006 - Dr.-Ing. Maichle, Frank
2006 - Dr.-Ing. Sun, Han
2005 - Dr.-Ing. Schubert, Sonja
2005 - Dr.-Ing. Wilms, Jochen
2005 - Dr.-Ing. Haasenritter, Andrea
2005 - Dr.-Ing. Hase, Matthias
2004 - Dr.-Ing. Amro, Mahmoud
2004 - Dr.-Ing. Rieber, Martin
2002 - Dr.-Ing. Klein, Markus
2002 - Dr.-Ing. Zeh, Dietmar
2001 - Dr.-Ing. Stoll, Peter
2001 - Dr.-Ing. Möbus, Helge
2001 - Dr.-Ing. Lutum, Ewald
1998 - Dr.-Ing. Roth, Norbert
1997 - Dr.-Ing. Schelkle, Markus
1997 - Dr.-Ing. Stuhler, Harald
1997 - Dr.-Ing. Funcke, Guido
1997 - Dr.-Ing. Klenk, Wolfgang
1997 - Dr.-Ing. Karl, Alexander
1994 - Dr.-Ing. Gerlinger, Peter
1994 - Dr.-Ing. Anders, Klaus
1994 - Dr.-Ing.Herrmann, Frank
1993 - Dr.-Ing. Dietrich, Stefan
1993 - Dr.-Ing. Geng, Weiqun
1993 - Dr.-Ing. Laschütza, Helmut
1990 - Dr.-Ing. Drtina, Peter
1990 - Dr.-Ing. Brenn, Günter
1990 - Dr.-Ing. Kraut, Thomas
1988 - Dr.-Ing. Kasal, Peter
1987 - Dr.-Ing. Jaberg, Helmut E.
1987 - Dr.-Ing. König, Gerold
1985 - Dr.-Ing. Walther, Rainer
1985 - Dr.-Ing. Westerdorf, Michael
1985 - Dr.-Ing. Offenhäuser, Friedrich
1984 - Dr.-Ing. Arndt, Stefan
1982 - Dr.-Ing. Schlott, Burckhard
1981 - Dr.-Ing. Dasing, Eckhard
1979 - Dr.-Ing. Reidelbach, Heinrich
1978 - Dr.-Ing. Hamad, Hanaa
1976 - Dr.-Ing. Nötzold, Dieter
1976 - Dr.-Ing. Oyegbesan, Adeleke O.
1975 - Dr.-Ing. Bauer, Gerd
1974 - Dr.-Ing. Haug, Walter
1972 - Dr.-Ing. Dienger, Gerwin
1971 - Dr.-Ing. Renz, Ulrich
1965 - Dr.-Ing. Bose, Tarit
1964 - Dr.-Ing. Lillich, Karl Heinz
Hier kann man auf die meisten Dissertationen der ehemaligen Doktoranden vom ITLR zugreifen:
Alle ehemaligen Mitarbeiter/innen
Dr.-Ing. Christoph Steinhausen
Marius Forster, M. Sc.
Jonas Steigerwald (geb. Kaufmann), M.Sc.
Andreas Schwab, M. Sc.
Adrian Schlottke, M. Sc.
Tobias Krille, M. Sc.
Jonathan Reutzsch, M.Sc.
Patrick Foltyn, M.Sc.
Dr. Wenkang Wang
Dipl. -Ing. Philipp Wellinger
Dr. -Ing. Visakh Vaikuntanathan
Charalampos Alexopoulos, M.Sc.
Jan Helmig, M.Sc.
Dipl. -Ing. Karin Schlottke
Dr.-Ing. Bernard, Ronan A.R.
Dipl. -Ing. Richter Judith
Dr. -Ing. Xu Chu
Dipl.-Ing. Daniel Prokein
Dipl.-Ing. Alexander Schindler
Martina Baggio, M.Sc.
Dr. Corine Kieffer-Roth
Ingeborg Karbiener (Bibliothekarin)
Dr. Sebastián Martínez Hernández
Dr.-Ing. Alexandros Terzis
Dr. -Ing. Anika Steurer
Dipl.-Ing. Corrado Sotgiu
Dr. -Ing. Martin Reitzle
Dr. David Sebastián Martínez Hernández
Sasha Mareck (Systemadministration)
Dr. -Ing. Michael Göhring
Dr. -Ing. Stefan Brack
Dr.-Ing. Norbert Roth
Dr.-Ing. Sebastian Spring
Dr.-Ing. Guang Yang
Dr. -Ing. Stefano Ruberto
Dr. -Ing. Moritz Ertl
Dipl.-Ing. Eva Kerber
Jürgen Fauser (Maschinenbau-Techniker)
Birgit Panzer (Sekretärin / Verwaltung)
Dr.-Ing. Mahmoud Amro
Dr.-Ing. Meriam Axtmann
Dr.-Ing. Steffen Baab
Dr.-Ing. Marius Banica
Dr.-Ing. Gerd Bauer
Dr.-Ing. Fahmi Ben Ahmed
Dipl.-Ing (FH) Günter Bertram (Elektroniker)
Dr.-Ing. Anuradha Ashok Bhatia
Dr.-Ing. Christoph Biegger
Dr.-Ing. Andreas Birkefeld
Dr.-Ing. Joachim Boltz
Dr.-Ing. Damien Bonin
Dr.-Ing. Robin Brakmann
Dr.-Ing. Dennis Brauckmann
Dr.-Ing. Lingling Chen
Dr.-Ing. Jaechul Chun
Dipl.-Ing. (FH) Denise Deutsch (Konstrukteurin)
Dr.-Ing. Christopher Dietz
Dr.-Ing. Norbert Domaschke
Dr.-Ing. Nils Dröske
Dr.-Ing. Christian Egger
Dr.-Ing. Felix Förster
Klaus Gerhäusser
Dr.-Ing. Peter Gerlinger
Dr.-Ing. Hassan Gomaa
Dr.-Ing. Frank Graf
Dr.-Ing. Kristian Haase
Dr.-Ing. Andrea Haasenritter
Erich Hamp (Industriemechaniker)
Dr.-Ing. Matthias Hase
Dr.-Ing. Peter Heidrich
Dr.-Ing. Annika Hell
Dr.-Ing. Marc Henze
Harald Hettrich (Maschinenbau-Techniker)
Dr.-Ing. Florian Höfler
Prof. Dr. Lingyun Hou
Dr.-Ing. Christoph Huber
Dr.-Ing. Herve Jeanmart
Sean Jenkins, Ph.D.
Dr.-Ing. Hend Kamoun
Dr.-Ing. Joachim Karnahl
Muthukkumaran Karthikeyan, M.Sc.
Dr.-Ing. Peter Kasal
Dr.-Ing. Harald Kissel
Dr.-Ing. Bernhard Kobiela
Bodo Krapkat (Industriemechaniker)
Dr.-Ing. Sébastien Kunstmann
Dr.-Ing. Tobias Langener
Dr.-Ing. Diane Lauffer
Dipl.-Ing. Maryline Leriche
Dr.-Ing. Cun-Liang Liu
Dr.-Ing. Frank Maichle
Dr.-Ing. Woradej Manosroi
Heinz Maschke (Industriemeister)
Dr.-Ing. Michael Maurer
Eberhard Mayer (Mechaniker)
Dr.-Ing. Barbara Mayer
Ahmer Mehmood, PhD
Dipl.-Ing. Christian Meister
Dr.-Ing. Bernd Mewes (MSAE)
Dr.-Ing. Helge Möbus
Martin Myrwa
Dr.-Ing. Sven Olaf Neumann, Akad. Oberrat
Dr.-Ing. Ernst Oldenhof
Sascha Pantic (Industriemechaniker)
Dr.-Ing. Detlef Pape
Dipl.-Ing. Farida Rahmawati Purnadiana
Dr.-Ing. Edder Jose Rabadan Santana
Ehab Awad Radwan, M.Sc.
Dr.-Ing. Philipp Rauschenberger
Dipl.-Met. Isabelle Reichardt
Dr.-Ing. Martin Rieber
Dr.-Ing. Eduard Rosenko
Dr.-Ing. Wolfgang Sander
Dr.-Ing. Tobias Scheuermann
Dr.-Ing. Jan Schlottke
Karin Schneiderhan (Industriemechanikerin)
Jutta Schöllhammer (Chemisch-technische Assistentin)
Ulrike Schroeder (Physikalisch-technische Assistentin)
Dr.-Ing. Sonja Schubert
Dipl.-Ing. Marco Schüler
Dr.-Ing. Sebastian Schulz
Dr.-Ing. Simon Schüren
Dr. -Ing. Sven Schweikert
Dr.-Ing. Alexander Schwientek
Dr.-Ing. Igor Shevchuk
Dipl.-Ing. Martin Sievers
Dr.-Ing. Helga Steinbrück
Dr.-Ing. Peter Stoll
Dr.-Ing. Ingo Stotz
Dipl.-Ing. Karl Straub
Martin Stricker (Bildverarbeitung)
Dr.-Ing. Han Sun
Dr.-Ing. Jochen Szimmat
Dr.-Ing. Naseem Uddin
Dr.-Ing. Juliane Urban
Dr.-Ing. Jiby Vellaramkalayil
Dr. -Ing. Florian Weckenmann
Dipl.-Ing. Hendrik Weking
Dr.-Ing. Jochen Wilms
Dr.-Ing. Sven Winkler
Dr.-Ing. Anja Wohler
Waltraud Wurster (Sekretariat/Verwaltung)
Dr.-Ing. Yunfei Xing
Dr.-Ing. Dietmar Zeh
Dr.-Ing. Sebastian Zehner
Dr.-Ing. Chengxiang Zhu
Florian Zuleger
Benjamin Schäuble
Jan Dederer
Anna Lena Leukert
Matthias Beha
Baris Bektas
Amir Mahmoud Nagi Hassanin
Yassin Ben Slama
Abdoul Ben Slama
Thomas Binder
Fabian Bluma
Dennis Braun
Damir Bucic
Enrico Chacon
Ümit Coban
Bogdan Dina
Dirk Doleschan
Michael Fischer
Oliver Grote
Martin Gründer
Marcel Hameister
Jürgen Hermann
David Höckner
Daniel Holzwarth
Andreas Illg
Enis Kaynak
Florian Knecht
Aleks Kommnik
Samuel Kontugan
Christian Koulalis
Philipp Lendle
Marcel Mayr
Nico Müller
Martin Myrwa
Serhat Özbey
Matthias Pfund
Thomas Pilz
Sebastian Prets
Martin Restle
Thomas Schäfer
Patrick Schehl
Alexander Schuster
Christian Seibt
Tino Weidling
Michael Wößner
Michael Wustlich
Andere Arbeitsgruppen am ITLR:
Ihre Ansprechpartner
Bernhard Weigand
Prof. Dr.-Ing. habil.Direktor
Susanne Stegmeier
Sekretariat/Verwaltung