This image shows Jens von Wolfersdorf

Jens von Wolfersdorf

Prof. Dr.-Ing.

Deputy director
Institute of Aerospace Thermodynamics

Contact

+49 711 685 62316
 +49 711 685 62317

Pfaffenwaldring 31
70569 Stuttgart
Germany
Room: 1-133

Office Hours

Chair of the Examination Board of Faculty 06 "Aerospace Engineering and Geodesy"
Tuesdays 14:00 to 16:00 or by appointment by e-mail to pa06@itlr.uni-stuttgart.de.
Registration from 2:00 p.m. on the day of the consultation, ITLR secretariat (room 1-136) !

Here you will find information from the University of Stuttgart about the current developments on the subject of coronaviruses.

The office hours of the examination board will be cancelled until the resumption of classroom teaching at the University of Stuttgart.

Please send your inquiries with the relevant documents by e-mail to: pa06@itlr.uni-stuttgart.de

For a conversation about your request, please submit a phone number with your e-mail request where we can reach you.

  1. Hartmann, C., & von Wolfersdorf, J. (2024). Determination of Local Heat Transfer Coefficients and Friction Factors at Variable Temperature and Velocity Boundary Conditions for Complex Flows. Fluids, 9(9), Article 9. https://doi.org/10.3390/fluids9090197
  2. de Arcos, D. G., Waidmann, C., Poser, R., von Wolfersdorf, J., & Jäppelt, B. (2022, June). Comparison of Experimental and Numerical Local Rotational Heat Transfer Effects in a Two-Pass Cooling Channel Configuration. Volume 6B: Heat Transfer — General Interest/Additive Manufacturing Impacts on Heat Transfer; Internal Air Systems; Internal Cooling. https://doi.org/10.1115/gt2022-79846
  3. Waidmann, C., Poser, R., de Arcos, D. G., Göhring, M., von Wolfersdorf, J., Semmler, K., & Jäppelt, B. (2022, June). Experimental Investigation of Local Heat Transfer in a Rotating Two-Pass Cooling Channel Using the Transient Thermochromic Liquid Crystal (TLC) Technique. Volume 6B: Heat Transfer — General Interest/Additive Manufacturing Impacts on Heat Transfer; Internal Air Systems; Internal Cooling. https://doi.org/10.1115/gt2022-81291
  4. Seibold, F., Schwab, A., Dubois, V., Poser, R., Weigand, B., & von Wolfersdorf, J. (2020). Conduction and Inertia Correction for Transient Thermocouple Measurements. Part I: Analytical and Numerical Modeling. Measuring Techniques in Turbomachinery.
  5. Prokein, D., & von Wolfersdorf, J. (2019). Numerical Simulation of Turbulent Boundary Layers with Foreign Gas Transpiration using OpenFOAM. Acta Astronautica, 158, 253--263. https://doi.org/10.1016/j.actaastro.2019.03.030
  6. Frąckowiak, A., Wolfersdorf, J. V., & Ciałkowski, M. (2019). Optimization of cooling of gas turbine blades with channels filled with porous material. International Journal of Thermal Sciences, 136, 370–378. https://doi.org/10.1016/j.ijthermalsci.2018.09.005
  7. Steurer, A., Poser, R., von Wolfersdorf, J., & Retzko, S. (2019). Application of the Transient Heat Transfer Measurement Technique Using Thermochromic Liquid Crystals in a Network Configuration with Intersecting Circular Passages. Journal of Turbomachinery 2019, 141(5), Article 5. https://doi.org/10.1115/1.4041807
  8. Schindler, A., Brack, S., & von Wolfersdorf, J. (2019). Coupled FE-CFD Analysis of Transient Conjugate Heat Transfer. 13th European Conference on Turbomachinery Fluid dynamics & Thermodynamics, Lausanne, Switzerland. https://www.euroturbo.eu/publications/proceedings-papers/etc2019-158/
  9. Prokein, D., Dittert, C., Böhrk, H., & von Wolfersdorf, J. (2019). Numerical simulation of transpiration cooling experiments in supersonic flow using OpenFOAM. CEAS Space Journal. https://doi.org/10.1007/s12567-019-00292-6
  10. Steurer, A., & von Wolfersdorf, J. (2019). Untersuchung der lokalen Wärmeübergangseigenschaften komplexer Kühlungsstrukturen durch Kombinationen experimenteller und numerischer Methoden. Schlussbericht AG Turbo COOREFLEX-turbo 3.2.4.
  11. Goehring, M., Hartmann, C., & Von Wolfersdorf, J. (2018). Numerical investigation of transient heat transfer experiments under rotation. Proceedings of the ASME Turbo Expo, 5A-2018. https://doi.org/10.1115/GT2018-76497
  12. Steurer, A., Poser, R., von Wolfersdorf, J., & Retzko, S. (2018). Application of the Transient Heat Transfer Measurement Technique Using TLC in a Network Configuration with Intersecting Circular Passages.
  13. Förster, F. J., Brack, S., Poser, R., von Wolfersdorf, J., & Weigand, B. (2018). A novel surface-integrated spray-on thermocouple for heat transfer measurements. Experimental Thermal and Fluid Science, 93, 356–365. https://doi.org/10.1016/j.expthermflusci.2018.01.017
  14. Prokein, D., Dittert, C., Böhrk, H., & von Wolfersdorf, J. (2018). Transpiration Cooling Experiments on a CMC Wall Segment in a Supersonic Hot Gas Channel. AIAA Propulsion and Energy Forum, Cincinnati, OH, United States. https://doi.org/10.2514/6.2018-4696
  15. Prokein, D., Dittert, C., Böhrk, H., & von Wolfersdorf, J. (2018). Numerical Simulation of Transpiration Cooling Experiments in Supersonic Flow using OpenFOAM. HiSST: International Conference on High-Speed Vehicle Science Technology, Moscow, Russia.
  16. Liu, C.-L., Gao, C., von Wolfersdorf, J., & Zhai, Y.-N. (2017). Numerical study on the temporal variations and physics of heat transfer coefficient on a flat plate with unsteady thermal boundary conditions. International Journal of Thermal Sciences, 113, 20–37. https://doi.org/10.1016/j.ijthermalsci.2016.11.013
  17. Makowka, K., Dröske, N. C., von Wolfersdorf, J., & Sattelmayer, T. (2017). Hybrid RANS/LES of a supersonic combustor. Aerospace Science and Technology, 69, 563–573. https://doi.org/10.1016/j.ast.2017.07.025
  18. Frackowiak, A., von Wolfersdorf, J., & Ciałkowski, M. (2017). An iterative algorithm for the stable solution of inverse heat conduction problems in multiply-connected domains. International Journal of Thermal Sciences, 96. https://doi.org/10.1016/j.ijthermalsci.2015.02.016
  19. Steelant, J., Dalenbring, M., Kuhn, M., Bouchez, M., & Von Wolfersdorf, J. (2017). Achievements obtained within ATLLAS-II on aero-thermal loaded material investigations for high-speed vehicles. 21st AIAA International Space Planes and Hypersonics Technologies Conference, Hypersonics 2017. https://www.scopus.com/inward/record.uri?eid=2-s2.0-85017532944&partnerID=40&md5=be27e0d439c4daaba5fb15cf044d8dcb
  20. Prokein, D., & von Wolfersdorf, J. (2017). Numerical Simulation of Turbulent Boundary Layers with Foreign Gas Transpiration using OpenFOAM. 7th European Conference for Aeronautics and Space Sciences (EUCASS), Milan, Italy. https://doi.org/10.13009/EUCASS2017-58
  21. Dröske, N. C., Förster, F. J., Weigand, B., & von Wolfersdorf, J. (2017). Thermal investigation of an internally cooled strut injector for scramjet application at moderate and hot gas conditions. Acta Astronautica, 132, 177–191. https://doi.org/10.1016/j.actaastro.2016.12.023
  22. Schulz, S., Brack, S., Terzis, A., von Wolfersdorf, J., & Ott, P. (2016). On the effects of coating thickness in transient heat transfer experiments using thermochromic liquid crystals. Experimental Thermal and Fluid Science, 70, 196–207. https://doi.org/10.1016/j.expthermflusci.2015.08.011
  23. Förster, F. J., Dröske, N. C., Bühler, M. N., von Wolfersdorf, J., & Weigand, B. (2016). Analysis of flame characteristics in a scramjet combustor with staged fuel injection using common path focusing schlieren and flame visualization. Combustion and Flame, 168, 204–215. https://doi.org/10.1016/j.combustflame.2016.03.010
  24. Axtmann, M., Poser, R., Von Wolfersdorf, J., & Bouchez, M. (2016). Endwall heat transfer and pressure loss measurements in staggered arrays of adiabatic pin fins. Applied Thermal Engineering, 103, 1048–1056. https://doi.org/10.1016/j.applthermaleng.2016.04.066
  25. Terzis, A., Skourides, C., Ott, P., von Wolfersdorf, J., & Weigand, B. (2016). Aerothermal investigation of a single row divergent narrow impingement channel by particle image velocimetry and liquid crystal thermography. Journal of Turbomachinery, 138(5), Article 5. https://doi.org/10.1115/1.4032328
  26. Terzis, A., Bontitsopoulos, S., Ott, P., Von Wolfersdorf, J., & Kalfas, A. I. (2016). Improved accuracy in jet impingement heat transfer experiments considering the layer thicknesses of a triple thermochromic liquid crystal coating. Journal of Turbomachinery, 138(2), Article 2. https://doi.org/10.1115/1.4031786
  27. Löhle, S., Schweikert, S., & Von Wolfersdorf, J. (2016). Method for heat flux determination of a transpiration-cooled wall from pressure data. Journal of Thermophysics and Heat Transfer, 30(3), Article 3. https://doi.org/10.2514/1.T4815
  28. Brack, S., Poser, R., & Von Wolfersdorf, J. (2016). An approach to consider lateral heat conduction effects in the evaluation process of transient heat transfer measurements using TLC. International Journal of Thermal Sciences, 107, 289–302. https://doi.org/10.1016/j.ijthermalsci.2016.03.028
  29. Schulz, S., Schindler, A., & von Wolfersdorf, J. (2016). An experimental and numerical investigation on the effects of aerothermal mixing in a confined oblique jet impingement configuration. Journal of Turbomachinery, 138(4), Article 4. https://doi.org/10.1115/1.4032022
  30. Liu, C.-L., Wolfersdorf, J. V., & Zhai, Y.-N. (2015). Comparison of time-resolved heat transfer characteristics between laminar and turbulent convection with unsteady flow temperatures. International Journal of Heat and Mass Transfer, 84, 376–389. https://doi.org/10.1016/j.ijheatmasstransfer.2015.01.034
  31. Prokein, D., Böhrk, H., & von Wolfersdorf, J. (2015). Analysis of Anisotropy Effects for Transpiration Cooled CMC Leading Edges using OpenFOAM. 20th AIAA International Space Planes and Hypersonic Systems and Technologies Conference, Glasgow, United Kingdom. https://doi.org/10.2514/6.2015-3552
  32. Bouchez, M., Dufour, E., Le Naour, B., Wilhelmi, C., Bubenheim, K., Kuhn, M., Mainzer, B., Riccius, J., Davoine, C., Justin, J.-F., Axtmann, M., von Wolfersdorf, J., Spring, S., Villace, V. F., & Steelant, J. (2015). Combustor materials research studies for high speed aircraft in the European Program ATLLAS-II. 20th AIAA International Space Planes and Hypersonic Systems and Technologies Conference, 2015. https://www.scopus.com/inward/record.uri?eid=2-s2.0-84947969355&partnerID=40&md5=339c92264b8bfcb7fe305124962e723c
  33. Terzis, A., Ott, P., Cochet, M., Von Wolfersdorf, J., & Weigand, B. (2015). Effect of varying jet diameter on the heat transfer distributions of narrow impingement channels. Journal of Turbomachinery, 137(2), Article 2. https://doi.org/10.1115/1.4028294
  34. Dahmen, W., Müller, S., Rom, M., Schweikert, S., Selzer, M., & Von Wolfersdorf, J. (2015). Numerical boundary layer investigations of transpiration-cooled turbulent channel flow. International Journal of Heat and Mass Transfer, 86, 90–100. https://doi.org/10.1016/j.ijheatmasstransfer.2015.02.075
  35. Axtmann, M., Von Wolfersdorf, J., & Meyer, G. (2015). Application of the transient heat transfer measurement technique in a low aspect ratio pin fin cooling channel. Proceedings of the ASME Turbo Expo, 5A. https://doi.org/10.1115/GT2015-42085
  36. Liu, C.-L., Von Wolfersdorf, J., & Zhai, Y.-N. (2015). Time-resolved heat transfer characteristics for periodically pulsating turbulent flows with time varying flow temperatures. International Journal of Thermal Sciences, 89, 222–233. https://doi.org/10.1016/j.ijthermalsci.2014.11.008
  37. Schulz, S., Schindler, A., & Von Wolfersdorf, J. (2015). An experimental and numerical investigation on the effects of aerothermal mixing in a confined oblique jet impingement configuration. Proceedings of the ASME Turbo Expo, 5A. https://doi.org/10.1115/GT2015-42286
  38. Terzis, A., von Wolfersdorf, J., Weigand, B., & Ott, P. (2015). A method to visualise near wall fluid flow patterns using locally resolved heat transfer experiments. Experimental Thermal and Fluid Science, 60, 223–230. https://doi.org/10.1016/j.expthermflusci.2014.09.009
  39. Dröske, N. C., Förster, F. J., Weigand, B., & von Wolfersdorf, J. (2015). Investigation of heat loads onto an internally cooled strut injector for scramjet application. 20th AIAA International Space Planes and Hypersonic Systems and Technologies Conference, 2015. https://www.scopus.com/inward/record.uri?eid=2-s2.0-84947968324&partnerID=40&md5=0841087e69399bf67b2ca657e052d66d
  40. Terzis, A., Ott, P., Von Wolfersdorf, J., Weigand, B., & Cochet, M. (2014). Detailed heat transfer distributions of narrow impingement channels for cast-in turbine airfoils. Journal of Turbomachinery, 136(9), Article 9. https://doi.org/10.1115/1.4027679
  41. Terzis, A., Von Wolfersdorf, J., Weigand, B., Cochet, M., & Ott, P. (2014). Detailed heat transfer distributions of narrow impingement channels with varying jet diameter. Proceedings of the ASME Turbo Expo, 5A. https://doi.org/10.1115/GT2014-25910
  42. Makowka, K., Sattelmayer, T., Dröske, N. C., Vellaramkalayil, J. J., & von Wolfersdorf, J. (2014). Unsteady RANS investigation of a hydrogen-fueled staged supersonic combustor with lobed injectors. AIAA AVIATION 2014 -19th AIAA International Space Planes and Hypersonic Systems and Technologies Conference. https://www.scopus.com/inward/record.uri?eid=2-s2.0-84907000928&partnerID=40&md5=53aed015f211c793a165ef248b12d726
  43. Dröske, N. C., Nizenkov, P., Vellaramkalayil, J. J., von Wolfersdorf, J., Makowka, K., & Sattelmayer, T. (2014). Validation of a novel openFOAM solver using a supersonic, non-reacting channel flow. AIAA AVIATION 2014 -19th AIAA International Space Planes and Hypersonic Systems and Technologies Conference. https://www.scopus.com/inward/record.uri?eid=2-s2.0-84907001330&partnerID=40&md5=c67b3ef86190ebb477bc550f8d6789ba
  44. Terzis, A., Wagner, G., Von Wolfersdorf, J., Ott, P., & Weigand, B. (2014). Hole staggering effect on the cooling performance of narrow impingement channels using the transient liquid crystal technique. Journal of Heat Transfer, 136(7), Article 7. https://doi.org/10.1115/1.4027250
  45. Terzis, A., Von Wolfersdorf, J., Weigand, B., & Ott, P. (2014). Local heat transfer distributions of small impingement configurations: A detailed experimental procedure using transient heat transfer methods. 15th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, ISROMAC 2014. https://www.scopus.com/inward/record.uri?eid=2-s2.0-84914163787&partnerID=40&md5=d906a57861cf04ae70946487a5ee0676
  46. Waidmann, C., Poser, R., Von Wolfersdorf, J., Fois, M., & Semmler, K. (2014). Investigations of heat transfer and pressure loss in an engine-similar two-pass internal blade cooling configuration. 10th European Conference on Turbomachinery Fluid Dynamics and Thermodynamics, ETC 2013, 1051–1063. https://www.scopus.com/inward/record.uri?eid=2-s2.0-84918503220&partnerID=40&md5=b81d12186796f3b999b6b2f13aa3396b
  47. Liu, C.-L., Wolfersdorf, J. V., & Zhai, Y.-N. (2014). Time-resolved heat transfer characteristics for steady turbulent flow with step changing and periodically pulsating flow temperatures. International Journal of Heat and Mass Transfer, 76, 184–198. https://doi.org/10.1016/j.ijheatmasstransfer.2014.04.033
  48. Waidmann, C., Poser, R., & Von Wolfersdorf, J. (2014). Application of thermochromic liquid crystal mixtures for transient heat transfer measurements. 10th European Conference on Turbomachinery Fluid Dynamics and Thermodynamics, ETC 2013, 685–696. https://www.scopus.com/inward/record.uri?eid=2-s2.0-84918579883&partnerID=40&md5=52cac0276da630b75d193ae498dba7e8
  49. Bouchez, M., Crampon, F., Le Naour, B., Wilhelmi, C., Bubenheim, K., Kuhn, M., Mainze, B., Riccius, J., Davoine, C., Justin, J. F., von Wolfersdorf, J., Abdelmoula, M., Villace, V. F., & Steelant, J. (2014). Combustor and material integration for high speed aircraft in the european research program ATLLAS2. AIAA AVIATION 2014 -19th AIAA International Space Planes and Hypersonic Systems and Technologies Conference. https://www.scopus.com/inward/record.uri?eid=2-s2.0-84906996582&partnerID=40&md5=3fac8085165c436577a8f57b8512e272
  50. Schulz, S., Schueren, S., & von Wolfersdorf, J. (2013). A particle image velocimetry-based investigation of the flow field in an oblique jet impingement configuration. Journal of Turbomachinery, 136(5), Article 5. https://doi.org/10.1115/1.4025212
  51. Egger, C., von Wolfersdorf, J., & Schnieder, M. (2013). Combined experimental/numerical method using infrared thermography and finite element analysis for estimation of local heat transfer distribution in an internal Cooling System. Journal of Turbomachinery, 136(6), Article 6. https://doi.org/10.1115/1.4025731
  52. Fechter, S., Terzis, A., Ott, P., Weigand, B., Von Wolfersdorf, J., & Cochet, M. (2013). Experimental and numerical investigation of narrow impingement cooling channels. International Journal of Heat and Mass Transfer, 67, 1208–1219. https://doi.org/10.1016/j.ijheatmasstransfer.2013.09.003
  53. Kunstmann, S., von Wolfersdorf, J., & Ruedel, U. (2013). Heat transfer and pressure loss in rectangular one-side-ribbed channels with different aspect ratios. Journal of Turbomachinery, 135(3), Article 3. https://doi.org/10.1115/1.4006871
  54. Egger, C., von Wolfersdorf, J., & Schnieder, M. (2013). Heat transfer measurements in an internal cooling system using a transient technique with infrared thermography. Journal of Turbomachinery, 135(3), Article 3. https://doi.org/10.1115/1.4007625
  55. Domaschke, N., von Wolfersdorf, J., & Semmler, K. (2012). Heat Transfer and Pressure Drop Measurements in a Rib Roughened Leading Edge Cooling Channel. Journal of Turbomachinery, 134(6), Article 6. https://doi.org/10.1115/1.4004747
  56. Karnahl, J., Von Wolfersdorf, J., Tham, K.-M., Wilson, M., & Lock, G. (2012). Computational fluid dynamics simulations of flow and heat transfer in a preswirl system: Influence of rotating-stationary domain interface. Journal of Engineering for Gas Turbines and Power, 134(5), Article 5. https://doi.org/10.1115/1.4004730
  57. Langener, T., Von Wolfersdorf, J., Selzer, M., & Hald, H. (2012). Experimental investigations of transpiration cooling applied to C/C material. International Journal of Thermal Sciences, 54, 70–81. https://doi.org/10.1016/j.ijthermalsci.2011.10.018
  58. Terzis, A., Von Wolfersdorf, J., Weigand, B., & Ott, P. (2012). Thermocouple thermal inertia effects on impingement heat transfer experiments using the transient liquid crystal technique. Measurement Science and Technology, 23(11), Article 11. https://doi.org/10.1088/0957-0233/23/11/115303
  59. Ben Ahmed, F., Poser, R., Schumann, Y., Von Wolfersdorf, J., Weigand, B., & Meier, K. (2012). A numerical and experimental investigation of an impingement cooling system for an Active Clearance Control system of a low pressure turbine. ISROMAC 2012 - 14th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery. https://www.scopus.com/inward/record.uri?eid=2-s2.0-84905715578&partnerID=40&md5=b65ee0a213bd7fcf2f64c8111badbe03
  60. Schueren, S., Hoefler, F., Wolfersdorf, J. V., & Naik, S. (2012). Heat Transfer in an Oblique Jet Impingement Configuration With Varying Jet Geometries. Journal of Turbomachinery, 135(2), Article 2. https://doi.org/10.1115/1.4006598
  61. Jenkins, S. C., Zehnder, F., Shevchuk, I. V., von Wolfersdorf, J., Weigand, B., & Schnieder, M. (2012). The Effects of Ribs and Tip Wall Distance on Heat Transfer for a Varying Aspect Ratio Two-Pass Ribbed Internal Cooling Channel. Journal of Turbomachinery, 135(2), Article 2. https://doi.org/10.1115/1.4006584
  62. Jenkins, S. C., Shevchuk, I. V., von Wolfersdorf, J., & Weigand, B. (2012). Transient thermal field measurements in a high aspect ratio channel related to transient thermochromic liquid crystal experiments. Journal of Turbomachinery, 134(3), Article 3. https://doi.org/10.1115/1.3106028
  63. Egger, C., Von Wolfersdorf, J., & Schnieder, M. (2012). Heat transfer measurements in an internal cooling system using a transient technique with infrared thermography. Proceedings of the ASME Turbo Expo, 4(PARTS A AND B), Article PARTS A AND B. https://doi.org/10.1115/GT2012-69160
  64. Henze, M., von Wolfersdorf, J., Weigand, B., Dietz, C. F., & Neumann, S. O. (2011). Flow and heat transfer characteristics behind vortex generators - A benchmark dataset. International Journal of Heat and Fluid Flow, 32(1), Article 1. https://doi.org/10.1016/j.ijheatfluidflow.2010.07.005
  65. Langener, T., Von Wolfersdorf, J., & Steelant, J. (2011). Experimental investigations on transpiration cooling for scramjet applications using different coolants. AIAA Journal, 49(7), Article 7. https://doi.org/10.2514/1.J050698
  66. Poser, R., & Von Wolfersdorf, J. (2011). Liquid Crystal Thermography for transient heat transfer measurements in complex internal cooling systems. Heat Transfer Research, 42(2), Article 2. https://doi.org/10.1615/HeatTransRes.v42.i2.60
  67. Schüler, M., Zehnder, F., Weigand, B., von Wolfersdorf, J., & Neumann, S. O. (2011). The effect of side wall mass extraction on pressure loss and heat transfer of a ribbed rectangular two-pass internal cooling channel. Journal of Turbomachinery, 133(2), Article 2. https://doi.org/10.1115/1.4000552
  68. Schueren, S., Hoefler, F., Von Wolfersdorf, J., & Naik, S. (2011). Heat transfer in an oblique jet impingement configuration with varying jet geometries. Proceedings of the ASME Turbo Expo, 5(PARTS A AND B), Article PARTS A AND B. https://doi.org/10.1115/GT2011-45169
  69. Shevchuk, I. V., Jenkins, S. C., Weigand, B., Von Wolfersdorf, J., Neumann, S. O., & Schnieder, M. (2011). Validation and analysis of numerical results for a varying aspect ratio two-pass internal cooling channel. Journal of Heat Transfer, 133(5), Article 5. https://doi.org/10.1115/1.4003080
  70. Schüler, M., Zehnder, F., Weigand, B., von Wolfersdorf, J., & Neumann, S. O. (2011). The effect of turning vanes on pressure loss and heat transfer of a ribbed rectangular two-pass internal cooling channel. Journal of Turbomachinery, 133(2), Article 2. https://doi.org/10.1115/1.4000550
  71. Hoefler, F., Schueren, S., von Wolfersdorf, J., & Naik, S. (2011). Heat transfer characteristics of an oblique jet impingement configuration in a passage with ribbed surfaces. Journal of Turbomachinery, 134(3), Article 3. https://doi.org/10.1115/1.4003084
  72. Henze, M., & Von Wolfersdorf, J. (2011). Influence of approach flow conditions on heat transfer behind vortex generators. International Journal of Heat and Mass Transfer, 54(1–3), Article 1–3. https://doi.org/10.1016/j.ijheatmasstransfer.2010.09.045
  73. Frckowiak, A., Wolfersdorf, J. V., & Ciałkowski, M. (2011). Solution of the inverse heat conduction problem described by the Poisson equation for a cooled gas-turbine blade. International Journal of Heat and Mass Transfer, 54(5–6), Article 5–6. https://doi.org/10.1016/j.ijheatmasstransfer.2010.11.001
  74. Hoefler, F., Dietrich, N., & Wolfersdorf, J. (2011). Heat transfer experiments in a confined jet impingement configuration using transient techniques. Journal of Heat Transfer, 133(9), Article 9. https://doi.org/10.1115/1.4003827
  75. Karnahl, J., Von Wolfersdorf, J., Tham, K.-M., Wilson, M., & Lock, G. (2011). CFD simulations of flow and heat transfer in a pre-swirl system: Influence of rotating-stationary domain interface. Proceedings of the ASME Turbo Expo, 5(PARTS A AND B), Article PARTS A AND B. https://doi.org/10.1115/GT2011-45085
  76. Kunstmann, S., Von Wolfersdorf, J., & Ruedel, U. (2010). Heat transfer and pressure drop in combustor cooling channels with combinations of geometrical elements. Proceedings of the ASME Turbo Expo, 4(PARTS A AND B), Article PARTS A AND B. https://doi.org/10.1115/GT2010-23234
  77. Domaschke, N., Wolfersdorf, J. V., & Semmler, K. (2010). Experimental investigation on heat transfer and pressure drop in a ribbed roughened leading edge cooling channel. 13th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery 2010, ISROMAC-13, 448–456. https://www.scopus.com/inward/record.uri?eid=2-s2.0-84865644671&partnerID=40&md5=5b2af6b379c6dcaf159f9c6076b14df6
  78. Langener, T., Von Wolfersdorf, J., Kuhn, M., & Steelant, J. (2010). Transpiration cooling with supersonic flows and foreign gas injection. 46th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit. https://www.scopus.com/inward/record.uri?eid=2-s2.0-84856859282&partnerID=40&md5=744d9302d3c3309389d604247c1f8ddf
  79. Hoefler, F., Dietrich, N., & Von Wolfersdorf, J. (2010). Heat transfer experiments in a confined jet impingement configuration using transient techniques. 2010 14th International Heat Transfer Conference, IHTC 14, 5, 519–529. https://doi.org/10.1115/IHTC14-22305
  80. Hoefler, F., Schueren, S., Von Wolfersdorf, J., & Naik, S. (2010). Heat transfer characteristics of an oblique jet impingement configuration in a passage with ribbed surfaces. Proceedings of the ASME Turbo Expo, 4(PARTS A AND B), Article PARTS A AND B. https://doi.org/10.1115/GT2010-22288
  81. Banica, M. C., Scheuermann, T., Chun, J., Weigand, B., & Von Wolfersdorf, J. (2010). Numerical study of supersonic combustion processes with central strut injection. Journal of Propulsion and Power, 26(4), Article 4. https://doi.org/10.2514/1.43599

More information about the working groups at the ITLR

To the top of the page